Call Us: 877-821-4811
Berkeley Nucleonics Corporation
Elgar (now Xantrex)
Genrad / IET Labs
IFR / Marconi
Rohde and Schwarz
Spanawave / Giga-tronics
Stanford Research Systems
TPI-Test Products International
Wandel & Goltermann
Xantrex (Elgar, Sorensen and Xantrex Products)
AC Power Supplies
Analog RF Signal Generators
Data Acquisition Systems
DC Electronic Loads
DC Power Supplies
Digital RF Signal Generators
LCR & Resistance Measurements
Noise Figure Instruments
Optical Power Meters
RF & Microwave Test Accessories
RF Microwave Signal Generators
RF Network/Spectrum/ Impedance Analyzers
Scalar Network Analyzers
Semiconductor Parameter Analyzers
Signal Source Analyzer
Telecommunications Test Products
Test Accessories, Cabinets, Cables
Transformer & Wound Components
Vector Signal Generators
Wireless Device Test Sets & Wireless Solutions
1 GHz, 10 GS/s, 4 Ch, 12.5 Mpts/Ch 12-bit HD Oscilloscope with 12.1" WXGA Color Display
10 MHz to 7 GHz Signal Source Analyzer
4 GHz, 20 GS/s, 4 Ch, 16 Mpts/Ch DSO with 12.1 WXGA Color Display
Infiniium DCA-J Oscilloscope Mainframe
Microwave Power Amplifier 10W 100 MHz to 20 GHz
MXA Signal Analyzer
MXG vector signal generator
PSG Analog Signal Generator
RF Signal Generator
Dual Channel Universal Power Meter
Scalar Network Analyzer - 10 MHz to 40 GHz
Anritsu 69317B Synthesized High Performance Signal Generator, 0.01 to 8.4 GHz
New / Refurbished
The 68C/69B's common, configurable platform allows Anritsu to configure a synthesizer that matches your requirements. Whether you need a basic synthesized CW generator for local oscillator use, or a full-featured configured 65 GHz signal generator with analog sweep and user-defined modulation, or anything in between.
Ultra-low SSB phase noise; < 100 dBc at 10 kHz offset from 10 GHz
Models from 0.01 to 65 GHz frequency coverage in a single coaxial output
Waveguide extensions to 110 GHz
+17 dBm maximum power, ≤125 dBm minimum power
Internal AM, FM, ΦM, pulse modulation
User down-loaded complex modulation
AVAILABLE EQUIPMENT OPTIONS
Rack Mounting: Rack mount kit containing a set of track slides (90° tilt capability), mounting ears, and front panel handles to let the instrument be mounted in a standard 48 cm equipment rack.
User-defined Modulation Capability (683xxC, and 693xxB): Provides user-defined waveform capability. Requires controller (not included). Includes cable and Windows® based software.
0.1 Hz Frequency Resolution: Provides frequency resolution of 0.1 Hz.
Anritsu 360B VNA Compatibility: Modifies rack mounting hardware to mate the unit in an Anritsu 360B VNA console.
High Power Output (680xxC, 681xxC, 690xxB and 691xxB): Adds high power RF components to the instrument in the 2−20 GHz frequency range.
High Power Output (683xxC and 693xxB): Adds high-power RF components to the instrument in the 2–20 GHz frequency range.
High Stability Time Base: Adds an ovenized, 10 MHz crystal oscillator as a high-stability time base. Derate phase noise specification at 10 Hz offset by 8 dB.
Delete Front Panel (68100C, 68300C, 69100B and 69300B): Deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed.
Delete Front Panel (68000C and 69000B): Deletes the front panel for use in remote control applications where a front panel display and keyboard control are not needed.
mmWave Bias Output: Adds rear panel bias output to drive 54000-xWRxx millimeter wave source modules. BNC Twinax connector. (Not available in combination with Option 20.)
SCPI Programmability: Adds GPIB command mnemonics complying with Standard Commands for Programmable Instruments (SCPI), Version 1993.0. SCPI programming complies with IEEE 488.2–1987.
SCAN Modulator: Adds an internal SCAN modulator for simulating high-depth amplitude modulated signals in models 68337C, 68347C, 69337B and 69347B only. Requires an external modulating signal input. (Not available in combination with Option 7, Option 18, or Option 22.)
(690xxB, 691xxB): Low Phase Noise, Non-pulsed Digital Downconverter replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW only from 10 MHz to 2.2 GHz
(693xxB): Low Phase Noise, Pulsed Digital Downconverter replaces standard analog downconverter on units with low frequency limit of 10 MHz. CW with pulse modulation from 10 MHz to 2.2 GHz
0.1 Hz to 10 MHz Audio Frequency: Adds CW and step sweep frequency coverage below 10 MHz. No modulation is available below 10 MHz. Derate output power by 1 dB for ≤20 GHz and 2 dB for >20 GHz (Not available in combination with Option 20.)
Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤20 GHz. Rated RF output power is reduced.
Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤ 40 GHz. Rated RF output power is reduced.
Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤ 50 GHz. Rated RF output power is reduced.
Step Attenuator: Adds a 10 dB/step attenuator for models having a high-end frequency of ≤ 60 GHz. Rated RF output power is reduced.
Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of ≤8.4 GHz. Rated RF output power is reduced.
Electronic Step Attenuator: Adds a 10 dB/step electronic attenuator for models having a high-end frequency of ≤20 GHz. Rated RF output power is reduced.
Phase Modulation (ΦM) (683xxC and 693xxB): Provides phase modulation capability. FM input, FM output and FM generator become FM/ΦM input, FM/ΦM output and FM/ΦM generator.
Delete AM/FM Generators (683xxC and 693xxB): Deletes the internal AM and FM generators. External AM and FM capability remains unchanged. (Not available in combination with Option 8 or Option 20.)
Internal Power Measurement (683xxC and 693xxB): Adds an internal power measurement function that is compatible with Anritsu 560-7, 5400-71 or 6400-71 series detectors. (Not available in combination with Option 7)
Rear Panel RF Output: Moves RF output connector to the rear panel.
Recently Viewed Items
Terms and Conditions
Copyright ©2008 LibertyTest. All rights reserved.
LibertyTest is an ISO 9001 certified company